Windscreen Wipers Are Not Now Only Used On Car Windscreens, They Have Lots Of Everyday Uses

When Windscreen wipers were initially invented, it was to assist the automobile driver to maintain his clean windscreen without needing to stretch his hand out of the car and clear the screen maually.

Nearly everywhere that glass is found, also you will find Wiper blades. They are not only used for the front windscreen of an automobile, but sometimes on hatchbacks are also fixed to the rear. Some automobiles also have Wiper blades on their headlamps. This is very effective for dirty roads, or in snowy conditions, where headlights could quickly become much less effective without this great invention.

Even planes have Windscreen wipers and I would expect that they require some of the best Wiper blades available. As they travel at such quick speeds and with major temperature differences anything less than the best would deteriorate quickly.

Public transport, be it buses, trams or trains, all have Windscreen wipers in order to assist their drivers to see where they are going. Whilst trains are on rails, and so it may be thought ”so why is it important for a train driver to see so clearly?” there are still signals along the track which the train driver needs to take heed of in order to ensure passenger safety. The operator also needs to be able to see when driving towards a station that the train stops safely. Wiper blades, therefore, are necessary for all modes of public transport.

Mopeds do not look to have Windscreen wipers and this is probably because not all motorbikes have windshields. Motorcyclists wear crash helmets with visors and they sometimes also have a special rain visor, so the necessity for Wiper blades on a scooter is not as high as it would be for other modes of transport.

The best wiper blades moving away from vehicles have in my opinion got to be the ones used by window cleaners. How much more simple it is to get a clean result on home, office and shop windows by the use of Wiper blades than ever it was with earlier methods. I am uncertain who first thought to move the Wiper blades away from the car windshield and used them on a window, but I respect them greatly. Sparkling windows are now much more easily achievable.

Smaller Wiper blades are also available to purchase for use in the bathroom, on shower screens and tiles, so that these can be kept clean and assist in the prevention of the accumulation of limescale.

This all just indicates how one individual’s idea of how to make life easier for a certain sector of the public can actually be beneficial to many more lives over time.

Make Sure You Check your Windshield Wiper Blades in Advance of the Cold Weather Sets In

As a lover of cars I spend a more than average amount of time making sure that my car is in the exact shape and working condition. As winter kicks in, the main focus for car drivers is to ensure that their vehicle is ready to cope with the changing weather conditions thrown up by the up coming months. As I am currently driving a sports car the main concern for me is visibility so the main point of topic are headlights and Wiper Blades.

Throughout the winter in England you will come across a wide varietyof weather conditions including snow, fog and ice so the importance of visibility in these conditions is vital to the safety of yourself and others on the road. The visibility in my sports car is not great as it is low to the ground, and the rear windscreen is partly blocked by the spoiler, so the front windscreen is of great importance.

I have four xenon headlamps fitted to the front spoiler and bumper and high performance Wiper Blades fitted to the windscreen. It took me a while to find the correct Windscreen Wipers to fit my car, although I paid a bit more than I thought I was going too, the high performance Wiper Blades that I got are great. If you’re your current Wiper Blades are worn, cracked or rigid with age, they will not adequately remove rain, grime and other debris that can obscure motorists’ vision through the winter months. If the Wiper Blades are sufficiently deteriorated, the metal Wiper Blades frame could contact and permanently damage the windscreen. Where mud or other debris is being thrown up on the windscreen, a good spray of the correct type of windscreen washer fluid will help the Windscreen Wipers in removing containments.

The life of a rubber insert is typically six to twelve months depending on its exposure to heat, dirt, sunlight, acid rain and ozone. Streaking and chattering are common evidence that the rubber is breaking down and needs replacement. There is an alternative material instead of using rubber and that is silicone which has a much stronger texture and will last twice the time of ordinary rubber Wiper Blades. Check the washer fluid reservoir monthly and more often if the washers are used frequently. Top it up with a washer solution formulated to aid in the removal of insects and other debris. During the winter, be sure to use a product with appropriate antifreeze protection.

All You Want To Know About Replacing Your Wiper Blades

Just purchased some new performance Silicone Wiper Blades and don’t know how to fit them? Not to worry, fitting Wiper Blades isn’t too complex and can only take around 5mins once you know what to do. The first thing you will need to know is when to actually change them, it’s necessary that your Windscreen Wipers are working for the rainy season but avoid changing them just before the summer as the hot sun can often distort the rubber of the blades. As a general rule, Wiper Blades should be exchanged every year at least, but must also be tested every 6 months to ensure they are still functioning correctly. If the wipers are squeaking or rubbing against the windshield it doesn’t necessarily indicate they need replacing, usually just cleaning the windscreen can help (without wax, as this can make the blades too slippery) and also ensure the Wiper Blades aren’t fastened too tight creating unnecessary tension.

Now that all of the requirements are out of the way, it’s time to get onto the hands on work. First you will need to carefully raise the Windscreen Wipers so that they stand up and are clear of the windscreen. On most cars this only requires you to simply lift the wiper outwards, if you are finding it difficult, you can switch the ignition on, initiate the wipers and then switch the ignition off, this will leave the wipers standing vertical and you should find it easier to lift them.
Next you will want to look at the length of the Wiper Blades as some cars have one smaller than the other and will need to be connected the correct way around. Now we need to remove the current Wiper Blades and this is often done by pushing in a small tab before pulling the blade out. Sometimes you may need to lift a tab up or even loosen a screw with a screwdriver. Once both blades have been removed, the new Wiper Blades will easily slide into the wiper arm and click into place, don’t forget to make sure the fitting is solid and if any screws were removed that they be put back.

With the new blades attached it’s time to test to ensure they work. You will need to carefully drop the Windscreen Wipers so that they lie flat on the windscreen again and once more give them a slight tug to make sure they are secure and won’t come flying off as you drive away. With the wipers back in place, start the ignition and give them a go.

So there we have it, those new Silicone Wiper Blades you just bought needn’t have to just sit in their box anymore, get out there and get them fitted!

Hassles Fitting Wiper Blades On My Mitsubishi

I’ve owned my Mitsubishi FTO MIVEC for 3 years and have had nothing but pleasure and enjoyment out of it. The only problem is with getting the parts needed to keep it maintained. I have been through 3 pairs of Wiper Blades and I am still not happy with the existing version that I have on. I got the high performance Silicone Wiper Blades from a local garage but they do not bend to the correct angle of the windscreen.

The concerns that I have with ordering parts for the FTO is that everything has to be imported from Japan to get the correct fit and style. I did realise this when I bought the car but I didn’t realise the cost of importing such things as Wiper Blades direct from the factory in Japan. This is because they do not make the existing version of the car anymore and therefore everything is by order and demand.

There are a couple of expert companies that can help with high performance parts, such as Wiper Blades, and I have used them in the past when the car failed it’s MOT and I needed a new seatbelt, mirror and locking catch. These expert dealers are comprehensively cheaper and you actually get to talk someone who will give you exact prices and delivery times. I used SMC who are a expert FTO parts dealer, I purchased the above parts and ordered the new high performance Wiper Blades which were a perfect fit, unfortunately they were too high performance and a local kid decided to treat himself to them the following week!

I have resigned myself to using local garage or store for Wiper Blades in case of the same occurring again. I went down to a local store and purchased a set of standard Wiper Blades which I thought would fit the windscreen, they were sizes 20” and 21”, they didn’t fit although the FTO name was on the packaging. I took the pair of Wiper Blades back and exchanged them for the rigid 19” version. The Wiper Blades fit the actual windscreen but did not curve around to fit the passenger side. I left these Wiper Blades on for at least six months but I noticed that during the winter months the rubber was tiring and I decided to go back to the Silicone Wiper Blades. As I have already commented on, I am still not happy with the appearance of my Wiper Blades but they are the best that I can find without paying for an import from Japan and paying a ransom.

Stuff You Need To Know About Switching Your Wiper Blades

Just purchased some new expensive Silicone Wiper Blades and don’t know how to connect them? Not to worry, connecting Wiper Blades isn’t too hard and can only take around 5mins once you know what to do. The first thing you will need to understand is when to actually change them, it’s vital that your Windscreen Wipers are working for the rainy weather but avoid changing them just before the summer as the hot sun can often distort the rubber of the blades. As a general rule, Wiper Blades should be changed every year at least, but must also be checked every 6 months to ensure they are still working as normal. If the wipers are squeaking or rubbing against the windshield it doesn’t necessarily mean they need replacing, sometimes just cleaning the windscreen can help (without wax, as this can make the blades too slippery) and also make sure the Wiper Blades aren’t fastened too tight creating unnecessary tension.

Now that all of the checks are out of the way, it’s time to get onto the practical work. To start, you will need to carefully raise the Windscreen Wipers so that they stand up and are clear of the windscreen. On most vehicles this only requires you to simply lift the blade outwards, if you are finding it challenging, you can turn the ignition on, activate the wipers and then switch the ignition off, this will leave the wipers standing vertical and you will find it easier to lift them.
Next you will need to examine the length of the Wiper Blades as some vehicles have one shorter than the other and will need to be connected the correct way around. Now we need to remove the existing Wiper Blades and this is usually done by pushing in a small tab before sliding the blade out. Sometimes you may need to lift a tab up or even loosen a screw with a screwdriver. Once both blades have been removed, the new Wiper Blades will easily slide into the wiper arm and click into place, don’t forget to make sure the fitting is secure and if any screws were removed that they be put back.

With the new wipers attached it’s time to check to make sure they work. You will need to slowly lower the Windscreen Wipers so that they lie flat on the windscreen again and once more give them a slight tug to ensure they are secure and won’t come flying off as you drive away. With the wipers back in place, start the ignition and give them a go.

So there we have it, those new Silicone Wiper Blades you just purchased don’t have to just stay in their box anymore, get out there and get them fitted!